A Real Network. No Fixed Infrastructure Required.
Whether you're running a remote work camp, managing a crew across a changing site, or travelling through areas with no mobile coverage — TX-E gives you a proper WiFi network wherever you set up.
Your site changes. Your connectivity shouldn't have to start from scratch.
Fixed infrastructure assumes a fixed location. But plenty of real work — and real life — happens somewhere new every few weeks. Temporary camps, rotating worksites, remote events, and caravan travel all share the same problem: you need a real network, but there's no building to plug into, no cable to run, and no tower nearby.
A 4G hotspot will get one person online. TX-E gives your whole team — or your whole campsite — a proper shared network, extended across the site with long-range HaLow WiFi. All running off your existing backhaul, whether that's Starlink, a 4G hotspot, or any other internet source you bring with you.
Built for operations that move
Forestry crews move between coupes every few weeks. TX-E deploys in minutes at each new location — connecting the crew hut, machinery area, and site office to a shared network for comms, fatigue monitoring, and VOIP. Pack up and redeploy when the coupe moves.
Remote construction sites need more than one hotspot. TX-E Connect Outdoor creates a site-wide network from your Starlink or 4G connection — covering the crib room, site office, and laydown areas. Roam keeps workers connected as they move around the site.
Running an event in a paddock or reserve without fixed infrastructure? TX-E deploys a shared WiFi network across your site — for staff communications, ticketing, point-of-sale, and volunteer coordination. No venue cabling required.
Tree planting days, conservation volunteering, and school outdoor programs often happen in areas with no mobile signal. TX-E keeps the group connected — enabling safety check-ins, VOIP communications, and device connectivity for the whole team in the field.
Take your home network with you. TX-E Roam connects to your Starlink or 4G hotspot and extends proper WiFi across your van, annex, and camp — so you're not fighting over one hotspot connection or dealing with dead zones inside the van.
Working in three steps
Bring your backhaul
TX-E extends whatever internet you already have — Starlink, a 4G hotspot, or any mobile broadband source. TX-E doesn't provide internet; it makes the most of what you bring.
Deploy Connect Outdoor as your base
TX-E Connect Outdoor connects to your backhaul and broadcasts a long-range HaLow WiFi signal across your site — up to 1.5 km through trees, terrain, and structures that would stop standard WiFi dead.
Roam keeps everyone connected
TX-E Roam is a pocket-sized, battery-powered unit that links back to Connect Outdoor and creates a personal WiFi hotspot — keeping each person connected for calls and data wherever they move across the site.
Running a compact or lightweight setup?
TX-E Roam can also act as the base unit on its own — connected directly to your backhaul and serving as a portable access point. Range will be shorter than a full Connect Outdoor deployment, but for smaller sites and tight groups it's a simple, single-device solution.
The TX-E product range for portable deployments
TX-E Connect - Outdoor
Connect Outdoor is the anchor of your portable network — drawing just 2.25W, it can run off a small solar panel or battery bank. Deploy it at the centre of your site, link it to your backhaul, and it covers the ground.
TX-E Roam
Roam travels with the person. Battery-powered and pocket-sized, it links back to Connect Outdoor and keeps each team member's phone, tablet, and devices connected — even through thick bush or vehicle walls.
Why TX-E works where other solutions don't
No mobile tower dependency
TX-E creates a private network from your own backhaul. It works in exactly the places where mobile coverage fails — which is usually exactly where you're deploying.
Penetrates vegetation and terrain
HaLow WiFi operates at 915 MHz — a frequency that travels through dense bush, around ridges, and inside metal site buildings far more effectively than standard 2.4 GHz WiFi.
Packs up and redeploys
No permanent installation. TX-E Connect Outdoor and Roam are designed to deploy, be used, and move on. Setup takes minutes, not days.
Low power — solar and battery viable
At 2.25W, Connect Outdoor runs comfortably from a small battery bank or a compact solar panel — no generator required for the network itself.
Guides for portable deployments
View all articlesReady to take your network off the grid?
Every deployment is different — distances, terrain, team size, and backhaul all shape the right setup. If you'd like to talk through what you need, get in touch. We're based in regional Victoria and we understand remote connectivity firsthand.
Talk to the TX-E Team